Selecting the proper base for your umbrella is very important. The base for your umbrellas will be determined by several factors: Will it be “Free Standing” or placed inside a table, the size of the canopy and the potential wind load in the area of use. Each of our base styles below come in specific colors and finishes found in the base section on our web site.

Concrete Bases

Our economical solid concrete bases are available in four finish colors and have a protective black sleeve and trim. Works best under the table. Available without wheels only.

Recommended for use with 7.5′, 8′ and 9′ umbrellas.


  • CB19 – 19″ diam x 14″ oah – 55 lbs
  • CB23 – 23″ diam x 18″ oah – 110 lbs
  • CB26 – 26″ diam x 18.5″ oah – 155 lbs
  • Weight: CB19 – 55 lbs, CB23 – 110 lbs, CB26 – 155 lbs
  • All bases come with black trim
  • Standard black sleeve accommodates poles up to 1.75″ in diameter
  • Some assembly required
  • CB19 available in White CB19W, Beige CB19B, Black CB19K, Champagne Bronze CB19C
  • CB23 available in Black only CB23K
  • CB26 available in Black only CB26K

*This base is not manufactured  in USA

Aluminum Bases

Recommended for use with 7.5′, 8′ and 9′ umbrellas.

Contemporary smooth style
– Available in four colors
– Base sleeve with through bolt to secure umbrella
– All models ship filled with concrete
– Instructions included. Some assembly and tools required.
– Base must be ordered with the proper sleeve size.
Add to model number:
-1 for 1 1/2″ pole, -2 for 1 3/4″ or 2″ pole, and -25 for 2 1/2″ pole

    Steel Bases

    • Available in 3 weights: 85 lb, 130 lb and 200 lb
    • Low profile steel base with welded base sleeve
    • Galvanized and powder coated silver. Also available in black
    • Through bolt to secure umbrella
    • Wheeled styles have “W” in model numbers
    • Base must be ordered with the proper sleeve size.
      Add to model number: 2 for 1.5″ pole & 2″ poles, 25 for 2.5″ pole.
      SBG85, SBG130 and SBG200 stationary (without wheels)
      SBGW130 and SBGW200 with wheels

    Sand Auger

    • Auger anchors umbrella into beach sand or dirt and provides housing for umbrella pole
    • Corrosion and weather-resistant heavy-duty aluminum
    • Welded rotor and included handle (not shown) provides maximum torque for easy installation and removal
    • Through bolt secures umbrella pole
    • Narrow openings on end tip allow water and sand to escape
    • Fits 1.5 and 2-inch umbrella poles

    Like what you see?  Ready to order?  

    Click here to visit our online shop.

    Ready to customize your umbrella?

    Send us a few details about your preferences and our umbrella experts will help design a shade product that work best for your outdoor room.